Connecting a Barcode Scanner
We support the following scanner models: Scanner not appearing? Ensure it's within 2m of the console during initial pairing Connection drops? Check battery level — below 10% can cause instability...
Connecting a Barcode Scanner
Supported Scanners
We support the following scanner models:
| Model | Connection | Range |
|---|---|---|
| SC-100 | Bluetooth 5.0 | 10m |
| SC-200 | USB + Bluetooth | 15m |
| SC-300 | WiFi Direct | 30m |
Pairing via Bluetooth
1. Hold the power button for 3 seconds
2. The LED will flash blue — scanner is in pairing mode
3. Select "SC-xxx" from the dashboard device list
4. Enter PIN: 0000 (default)
Troubleshooting Pairing Issues
- Scanner not appearing? Ensure it's within 2m of the console during initial pairing
- Connection drops? Check battery level — below 10% can cause instability
- Wrong barcodes? Verify the scanner firmware is up to date in Settings → Devices
Did you find this article helpful?